Conveyor-Mate™ 315 Sanitizer System

Model # 975910

The Conveyor-Mate™ 315 Sanitizer System is specialized for Clean-In-Place spray sanitizing on to conveyor belts and can also be used as a manual sanitizer. The stainless steel spray arm and nozzle assembly can be permanently or temporarily mounted to the conveyor belt housing or nearby surface. The fully adjustable spray arm extends vertically and horizontally to virtually any position. The unique stainless steel Spreader Nozzle™ creates a wide spray pattern that can be adjusted and rotated to ensure optimal coverage at any angle. The included 315 Sanitizer is a venturi dilution system that uses city water pressure (35 - 125 PSI) to accurately draw and blend chemical concentrate into the water stream. The solution is then projected through the discharge hose to the spray arm. Quick disconnect the spray arm and attach a wand for manual sanitizing.

Key Features
  • 315 Sanitizer accurately dilutes concentrated sanitizers using precision metering tips, and can achieve the lean ratios required for no-rinse applications in food plants
  • Sanitizer discharge hose quick connects to the spray arm for CIP cleaning or the hand-held wand for manual spray sanitizing
  • Fully-adjustable spray arm accommodates many conveyor belt positions — horizontal, vertical, angled, side-by-side, etc.
  • Unique Spreader Nozzle™ projects a wide spray pattern
    • 28" overhead distance = 48" wide coverage
    • Coverage width increases with distance
  • Each Spreader Nozzle™ can also be rotated 360° to spray at any angle for wider coverage or to hit hard-to-reach locations
  • Spray arm can be permanently or temporarily mounted
  • Manual sanitize wand projects a high volume flooding spray in a fan pattern for complete coverage
  • Machined stainless steel and polypropylene components ensure durability and years of outstanding performance
  • Industrial-strength design holds up in tough environments
  • Available as a foamer (#975930)
  • Lafferty also manufactures portable Conveyor-Mate™ systems (#975912)
  • See other Lafferty city water pressure foamers in Catalog 1 


  • 315 Sanitizer
  • 40' discharge hose with stainless steel ball valve and quick disconnect socket
  • Quick disconnect stainless steel foam arm with Spreader Nozzle™
  • Quick disconnect manual sanitize wand with fan nozzle
Chemical Concentrate
Temperature up to 160°F
Pressure 35 to 125 PSI
Flow 4 GPM @ 40 PSI
Supply Line 1/2"
Hose 3/4" ID x 40'
Nozzle Spreader Nozzle (#180357) or 40100
Dilution Ratio Range 914:1 to 9:1 @ 40 PSI
Stainless Steel Hose Racks
Large Stainless Steel Hose Rack# 224150
Stainless Steel Jug Racks
1 Gallon Round/Square# 224200
1 Gallon Round/Square Locking# 224200-L
2 ½ Gallon (8 ½" x 10 ½")# 224210
5 Gallon (12" x 12")# 224215
5 Gallon Round Locking# 224216
Alternate Sanitizer Check Valve - Viton Standard
Check Valve, Chemical, PP/EPDM, 1/4"# 491311
Stainless Steel Wand (Upgrade)
Convert PP Wand to SS (New Units)# 536603-X
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to