When activated, the Fogger Recycling Controller starts fogger operation immediately and runs for a predetermined period of time then switches off for a predetermined period (the Delay cycle), after which the fogging cycle starts again. The complete cycle will repeat until the unit is switched off or reprogrammed. The Run and Delay times are set independently by rotating the arrow on a dial to select the number of hours desired for the cycle --up to 6 hours each. Hash marks indicate 15 minute increments.
• (NOTE: The total air CFM requirement of all the foggers connected to this controller must be less than 180 CFM, which is the air CFM capacity of the controller's 1/2 inch solenoid. For a higher air capacity up to 460 CFM, see controller model #950812.)
For details and planning assistance, use the online Fogger Planning Tool: www.laffertyequipment.com/tools/fogger-planning/