Portable 60 Gallon Freedom 2.4 / 2.4 Sprayer

Model # 942136

The Portable 60 Gallon 2.4 / 2.4 Freedom Sprayer is a dual-hose chemical applicator for projecting ready-to-use chemical solution as a fan pattern spray. This unit features a lockable, stainless steel enclosure, a 4-wheel stainless steel cart, and a rugged 1/2" Sandpiper air-operated, double-diaphragm pump that draws pre-diluted chemical from the 60 gallon tank and discharges the solution through the hose, wand and nozzle. Each discharge assembly includes two spray nozzles, which provide either 5 or 3.25 minutes of spraying time per 20 gallons of solution, depending on the nozzle used (assuming both hoses in operation).

Key Features
  • Two discharge hose assemblies for single or dual use.
  • Offers a higher volume than Liberty Sprayers, projecting a low or medium flow fan pattern, depending on the nozzle used from the two included.
  • Sprays for 5 or 3.5 minutes per 20 gallons of solution, based on nozzle(s) used (assuming both hoses in operation).
  • Draws pre-diluted chemical from the 40 gallon tank
  • Rugged 1/2" Sandpiper AODD pump with Santoprene diaphragms
  • The chemical flow rate is regulated to match the pump's optimum operating range, which protects the pump from running, repetitively, at maximum capacity
  • Powered solely by compressed air
  • Chemical resistant wetted components ensure durability and years of reliable service
  • Available with a 40 gallon tank (#942124)
  • Available with one hose and 60 gallon tank (#942126)
  • See other air-operated sprayers and foamers in Catalog 4


  • All stainless steel 4-wheel cart assembly
  • Non-marking tires
  • Two stainless steel swivel casters
  • 60 gallon, wide-mouth polyethylene tank with drain
  • Lockable, stainless steel pump enclosure
  • Air inlet ball valve and regulator/filter
  • Sandpiper 1/2" AODD pump
  • Two 50' discharge hoses, each with stainless steel ball valve, stainless steel wand and two fan nozzles
Ready-to-Use Chemical Solution
Compressed Air up to 9 CFM
Hose 1/2" ID x 50'
Nozzle 2520 & 2530
Proportioning / Filling Options
1-Way Ball Valve Mixing Station (4 GPM)# 985100
1-Way Push Lever Mixing Station (4 GPM)# 981100
High Volume Mixing Station (9.9 GPM)# 985835
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com