Single Foam Stick Set

Model # 910061

The Single Foam Stick Set is a foam applicator designed for car-wash pre-soak, brush lubrication or to apply any foaming product. This unit receives pre-diluted chemical from a pumping system. Thick, rich, clinging foam is created by injecting compressed air into the solution to greatly expand volume and coverage ability. The foam is then projected through the pair of 6 foot foam sticks. A fixed flow rate allows just one air valve to easily adjust foam quality for both sticks. Great for retrofitting and for new installations.

Key Features
  • Can be used for new installations or to easily replace damaged or inconsistent existing systems
  • Receives pre-diluted chemical from a pumping system
  • Unique design - no scrubby pads to replace and requires minimal maintenance
  • Projects thick, rich, clinging foam which increases chemical contact time and effectiveness
  • A single needle valve adjusts the foam consistency (wet/dry) for both foam sticks
  • Eliminates operator adjustment issues resulting in a consistent cost-per-vehicle operation
  • Chemical resistant wetted components ensure durability and years of reliable performance
  • Time proven to be the best foam stick available
  • Available with a pumping system (#910065)
  • Available as a Triple Foam Stick Set (#910310)
  • See other car wash chemical applicators in Catalog 10


  • Solution check valves
  • 2 machined polypropylene foamer bodies
  • Two 6' precision-drilled, clear, PVC foam sticks
  • Air adjustment needle valve
  • Compressed air line tee with 8' of tubing to each foam stick
Ready to Use Chemical Solution
Solution Pressure 40 - 60 PSI
Flow Rate up to 2 GPM
Compressed Air up to 1.5 CFM
Liquid Tubing - Pump to Tee 1/2" I.D.
Liquid Tubing - Tee to Foam Sticks 3/8" I.D.
Tubing From Air Supply 1/4" I.D.
Alternate Check Valve (Viton Standard)
TL Check Valve, PVC / EPDM, 3/8"# 491456-E
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to