Chemical Concentrate or Ready-to-Use Solution | |
Compressed Air | up to 4 CFM per pump |
Requirements
Chemical Concentrate or Ready-to-Use Solution | |
Compressed Air | up to 4 CFM per pump |
Overview
The 1-Way Lock Box FPS Transfer System is for filling any sized container with chemical concentrate or ready-to-use solution. The Lock Box model features a lockable, stainless steel mounting enclosure to protect the pump and air regulator. Compressed air powers a FloJet air pump which draws chemical from the drum or tote and dispenses it through a 15 foot discharge hose and trigger gun. This unit uses a ball valve as the on/off control for the pump.
Safety & Operational Precautions
To Install (refer to diagram on next page)
TRIGGER GUN
BALL VALVE
Troubleshooting Guide |
---|
Problem | Possible Cause / Solution | |
---|---|---|
Startup | Maintenance | |
A) Air pump will not run or pump chemical solution. B) Will not draw chemical. C) Pump runs too fast with no output. | 1,3,4 1,2,3 2 |
5,6,9,10 6,7,8 6,7,8,9 |
Possible Cause / Solution | |
---|---|
Startup | Maintenance |
|
|
PREVENTIVE MAINTENANCE: When the unit will be out of service for extended periods, place chemical tube(s) in water and flush the chemical out of the unit to help prevent chemical from drying out and causing build-up. Periodically check and clean chemical strainer and replace if missing. |