Paired Level Master Tank | See Options |
Water Supply | Up to 7 GPM @ 40 PSI |
Water Pressure | 125 PSI Max. |
Requirements
Paired Level Master Tank | See Options |
Water Supply | Up to 7 GPM @ 40 PSI |
Water Pressure | 125 PSI Max. |
Overview
The Static Water Tank Level Master™ (No Tank) automatically maintains a constant supply of water in a paired tank (sold separately). When the water in the tank drops below a pre-set level, it is replenished using city water pressure (up to 125 PSI) and cycles continuously.
Safety & Operational Precautions
To Install (refer to diagram on next page)
Backflow prevention: Follow all local codes for preventing backflow into the water supply before installing / operating equipment.
To Operate
NOTE: The fill level is pre-determined by the length of the "push rod" attached to the float, which is intended to be used as provided. If necessary, the float can be lowered 1/2" by partially unscrewing it from the push rod.
Troubleshooting Guide |
---|
Problem | Possible Cause / Solution | |
---|---|---|
Startup | Maintenance | |
A) Primary float will not activate (does not fill) B) Primary float valve will not turn off (overfills or triggers secondary fail-safe float valve on double-float models) | 1, 2, 3, 4 2, 3 |
5, 6, 7, 8, 9, 10 6, 7, 8, 9, 10 |
Possible Cause / Solution | |
---|---|
Startup | Maintenance |
|
|
PREVENTIVE MAINTENANCE: When the unit will be out of service for extended periods, place chemical tube(s) in water and flush the chemical out of the unit to help prevent chemical from drying out and causing build-up. Periodically check and clean chemical strainer and replace if missing. |