Lafferty Airless Foamers™

Low Pressure Airless Foamers (Wall Mount) – 35 to 125 PSI

Benefits:

• No compressed air required
• Efficiently apply any foaming chemical to any surface
• Airless foam wand machined from solid polypropylene
• Two models available, each with a different water flow rate

Features:

• SS base with hinged cover
• PP injector body & check valve
• 20 color-coded metering tips
• 50’ hose assembly with shutoff valve and airless foam wand

Water Flow Rates @ 40 PSI:

• 1.34 gpm – A-25
• 2.10 gpm – A-50

High Pressure Airless Foamers (Wall Mount) – 400 to 1000 PSI

Benefits:

• High pressure application of any foaming chemical to any surface
• Two models are available, each with a different water flow rate

Features:

• Stainless steel base with hinged cover
• Stainless steel injector body
• 20 color-coded metering tips
• 50’ hose assembly with trigger gun and stainless steel airless foam wand

Water Flow Rates @ 700 PSI:

• 1.60 gpm – A-10SS
• 3.40 gpm – A-15SS

Uni-Body Airless Foamers (Wall Mount) – 35 to 125 PSI

Benefits:

• No compressed air required
• Efficiently apply any foaming chemical to any surface
• Airless foam wand machined from solid polypropylene
• Two models available, each with a different water flow rate

Features:

• Machined polypropylene Uni-Body
• Polypropylene check valve
• 20 color-coded metering tips
• 50’ hose assembly with shutoff valve and airless foam wand

Water Flow Rates @ 40 PSI:

• 1.34 gpm – A-25
• 2.10 gpm – A-50

Uni-Body Airless Brush Foamer (Wall Mount) – 35 to 125 PSI

Uses:

• Pre-soak application
• Self-serve car wash
• Detail shop
• Auto dealer
• Fleet vehicle service center
• Anywhere scrubbing action is needed

Benefits:

• Creates quality, wet foam
• Instant foam – No compressed air required!
• Venturi action

Features:

• Machined polypropylene Uni-Body
• Metering tips for choice of dilution ratios
• 50' blue hose
• 44" handle with on/off ball valve

Acid Airless Foamers (Wall Mount & Drum Mount) – 40 to 125 PSI

Benefits:

• Produce wet, clinging foam without compressed air
• Apply up to three different chemicals
• Provide up to a 4:1 dilution ratio

Features:

• Polypropylene base and cover
• Polypropylene injector body
• 20 color-coded metering tips
• 50’ discharge hose assembly with PVC ball valve, 28’’ polypropylene extension wand and airless foam wand

Manually Operated Uni-Body Asphalt Release Airless Foamer (Wall Mount) – 35 to 125 PSI

Benefits:

• Ideal for applying release agents to truck beds as wet foam – No compressed air required!
• Connects to standard male garden hose fitting
• Draws asphalt release agent directly from original shipping containers
• Two models are available, each with a different water flow rate

Features:

• Manual on/off ball valve
• Machined from solid polypropylene
• 20 color-coded metering tips
• 25’ hose assembly with stainless steel ball valve, 18" stainless steel wand and airless foam wand (Prices available upon request for units without hoses)

Water Flow Rates @ 40 PSI:

• 1.34 gpm – A-25
• 2.10 gpm – A-50

Timed Uni-Body Asphalt Release Airless Foamer Complete
with Delay & Remote (Wall Mount) – 35 to 125 PSI

Benefits:

• Connects to standard male garden hose fitting
• Efficiently apply asphalt release agent as wet foam – No compressed air required!
• Truck drivers or other operators push a button to start hand application
• Two field-adjustable timers precisely control chemical use:
• Run Timer controls how long the system runs
• Delay Timer prevents the system from being restarted immediately, avoiding over-application
• Draws asphalt release agent directly from original shipping containers

Features:

• Polypropylene base
• Fiberglass enclosures
• Machined polypropylene Uni-Body
• 20 color-coded metering tips
• 25’ hose assembly with 18" stainless steel wand and machined polypropylene airless foam wand