DART AP-MM Asphalt Release Spray System

Model # 977801

The DART AP-MM Asphalt Release Spray System is a push button activated, time delayed, asphalt release applicator that mounts to a user-supplied drive-through arch for spraying asphalt truck beds. This system uses compressed air to drive a rugged Sandpiper air-operated, double-diaphragm pump which draws chemical concentrate and water from separate static tanks and blends them "on-the-fly" to create an accurately diluted solution. The driver pushes the button to activate the system, a delay timer allows the driver to position the truck under the spray nozzle before spraying begins and a run timer prevents overuse of the release agent.

Key Features
  • Designed to spray asphalt release chemicals on to truck beds from a nozzle that attaches to an existing drive-through spray bar
  • The rugged Sandpiper AODD pump draws chemical concentrate and water from separate static tanks and blends them "on-the-fly"
  • The push button activated, adjustable, single-shot timer will delay for up to 60 seconds, allowing the driver to get in position, and then apply chemical for up to 60 seconds before shutting off
  • The driver remains in his cab and avoids the risk of slip-and-fall injury and chemical waste
  • Evenly coats the truck bed in just seconds, reducing run-off and chemical waste
  • A float valve assembly attaches to, and automatically refills, a user-supplied static water tank
  • Achieves a range of dilution ratios using a metering manifold to control chemical and water flow
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Available for use with pre-diluted chemicals (#977800)
  • Available as a foam applicator (#977901)
  • See other Lafferty asphalt release equipment and industrial chemical applicators in Catalog 8
Includes
  • Lockable, stainless steel pump enclosure
  • 1/2" Sandpiper AODD Pump (Santoprene diaphragms)
  • Machined polypropylene metering manifold
  • Control box with delay/run timers & remote push button
  • Water tank float valve assembly
  • 40' discharge hose with square spray nozzle
Chemical Concentrate
Static Tank of Water
Compressed Air up to 10 CFM
Minimum Air Supply Line 3/8"
Hose 3/4" ID x 40'
Nozzle 45WSQ
Electric 120V
Heater Assembly
Retro-Fit Heater Assembly# 720981
Drum & Tote Stick Lengths, Styles & Seal Materials
Drum Stick, 33" (Viton or EPDM)# 491643 / 491643-E
Drum Stick, 48" (Viton or EPDM)# 491648 / 491648-E
Drum Stick, 54" (Viton or EPDM)# 491645 / 491645-E
Tote Stick, 48" (Viton or EPDM)# 491654 / 491654-E
Tote Stick, 54" (Viton or EPDM)# 491656 / 491656-E
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com