Foam System Comparisons

Lafferty Foamer bodies provide high chemical resistance and durability.

All bodies are machined from either solid polypropylene or solid stainless steel.

Foamer Type Water Pressure Range (PSI)  
Low End Top End Dilution Ratio Range Hose Length (feet) Foam Throw (feet) Foam Volume Foamer Body Material Hose-End Shutoff
LV 35 125 149:1 to 5:1 at 40 PSI 40 9 Low PP
Ultimate 35 125 306:1 to 6:1 at 40 PSI 50 12 Medium PP
Ultimate SS 35 125 306:1 to 6:1 at 40 PSI 50 12 Medium SS
LC 35 125 306:1 to 6:1 at 40 PSI 40 12 Medium PP
LCHC 35 125 331:1 to 3:1 at 50 PSI 40 12 Medium PP
LCSS 35 125 306:1 to 6:1 at 40 PSI 40 12 Medium SS
HV 35 125 914:1 to 6:1 at 40 PSI 50 25 High PP
HVHC 35 125 914:1 to 6:1 at 40 PSI 50 25 High PP
HVHCSS 35 125 914:1 to 6:1 at 40 PSI 50 25 High SS
Super HV 35 150 2,240:1 to 10:1 at 40 PSI 50 45 Very High PP  
BP 125 350 679:1 to 6:1 at 250 PSI 50 13 Medium PP  
BPSS 125 350 679:1 to 6:1 at 250 PSI 50 13 Medium SS  
Mega 125 350 2,066:1 to 8:1 at 250 PSI 50 40 Very High PP  
Hyper 400 700 756:1 to 8:1 at 700 PSI 50 13 Medium PP  
Hyper SS 400 1000 756:1 to 8:1 at 700 PSI 50 13 Medium SS  
HP 400 700 454:1 to 6:1 at 700 PSI 50 13 Medium PP  
HPSS 400 1000 454:1 to 6:1 at 700 PSI 50 13 Medium SS  
TGSS 400 1000 203:1 to 4:1 at 700 PSI 50 10 Low/Medium SS
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com