Portable 5 Gallon Conveyor-Mate™ 315 / 315 Sanitizer System

Model # 975912

The 315/315 Conveyor-Mate™ is a portable sanitizing system designed specifically for Clean-In-Place spraying on to conveyor belts. This venturi dilution system uses city water pressure (35 - 125 PSI) to accurately draw and blend chemical concentrate into the water stream. Dual injector bodies operate independently for one side only or simultaneously for the top and underside. Fully adjustable spray arms extend vertically and horizontally to virtually any position. The unique stainless steel Spreader Nozzles™ create a wide spray pattern that can be adjusted and rotated to ensure optimal coverage at any angle.

Key Features
  • Fully-adjustable spray arms accommodate many conveyor belt positions — horizontal, vertical, angled, side-by-side, etc.
  • Unique Spreader Nozzles™ project a wide spray pattern
    • 28" overhead distance = 48" wide coverage
    • Coverage width increases with distance
  • Each Spreader Nozzle™ can also be rotated 360° to spray at any angle for wider coverage or to hit hard-to-reach locations
  • Spray arms can run independently or simultaneously to spray one or both sides of a conveyor belt
  • Dilution ratio for each spray arm is set independently with precision metering tips
  • Water pressure gauge eliminates guessing to reduce set-up time and help with troubleshooting
  • Machined stainless steel and polypropylene components ensure durability and years of outstanding performance
  • Industrial-strength design holds up in tough environments
  • Available as a foamer (#975922)
  • Lafferty also manufactures fixed-location foam and spray/sanitize bars for situations where portability is not required
  • See other Lafferty city water pressure equipment in Catalog 1 

Includes

  • All stainless steel 4-wheel cart with 5 gallon jug rack
  • Non-marking tires with locking stainless steel swivel casters
  • Easy-to-read pressure gauge for incoming water
  • (2) Machined polypropylene injector bodies
  • (2) 20 color-coded metering tips for setting dilution ratios
  • (2) 5' hoses to connect injector bodies to spray arms
  • (2) Stainless steel extension arms with Spreader Nozzles™
  • Color-coded ball valves and hoses for each spray arm
Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35 to 125 PSI
Flow 4.0 GPM @ 40 PSI
Supply Line 3/4"
Nozzle #180357
Hose 1/2" ID x 5'

Requirements shown are per spray bar

Dilution Ratio Range 914:1 to 9:1 @ 40 PSI
Square Jug Rack Conversion
Specify Round or Square Jug Racks at time of order
Alternate Check Valve - EPDM Standard
Check Valve, Chemical, SS, Viton, 1/4"# 491324-V
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com