The 3-Bar Pump Fed Truck Foam Arch is an adjustable, drive-through foam applicator for washing large vehicles. This unit receives ready-to-use chemical solution from a user-supplied central chemical feed system and injects compressed air to greatly increase volume and coverage ability. Rich, clinging foam is projected from multiple nozzles for complete coverage. The solution flow rate and foam consistency for each foam bar can be adjusted "on-the-fly" during operation.
3-Bar Pump Fed Truck Foam Arch
Model # 910930-PF
Overview
Key Features
- Receives pre-diluted chemical from a user-supplied central chemical feed system
- Creates rich, clinging foam which increases chemical contact time and effectiveness
- Adjustable solution flow rate for each foam bar ensures optimal performance
- Adjustable foam consistency (wet/dry) for each foam bar
- Chemical resistant wetted components ensure durability and years of reliable performance
- Available to dilute chemical "on-the-fly" (#910930)
- Pumping system available (#919060)
- See more foam/spray bar units in Catalog 10
Includes
- Lockable, stainless steel enclosure
- Inlet ball valves with air & solution adjustment needle valves
- Machined polypropylene solution manifold
- 3 machined polypropylene TransFoamer™ bodies
- One 8' top foam bar with 8 fan nozzles
- Two 13.6' side foam bars with 16 fan nozzles
Applications
- Fleet Washing
- School Buses
- Tanker Trucks
- Carwash Facilities
- Construction Yards
- And Many Other Applications!
Requirements
| Ready-to-Use Chemical Solution (Minimum 55 PSI at Unit) |
| Supply Line | 1" ID |
| Temperature | up to 160°F |
| Pressure | 55-125 PSI |
| Flow | Variable-up to 16 GPM |
| Hose/Pipe | 1-1/2'' |
| Compressed Air | up to 14 CFM |
| Nozzles | |
| Top Bar | 4040 |
| Side Bars | 6530 |