The Satellite Entryway HV Foam Sanitizer is an automated foam applicator for projecting sanitizing chemicals on to floors of 8'-16' wide/overhead doors to prevent cross contamination. When activated, this venturi injection system uses city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. Foam is then projected through the discharge hose and Spreader™ nozzle. Up to 10 Satellite units are activated and operated by compressed air from a timed Entryway Satellite Controller - no electrical connection is required at the entryway location. All units will activate and deactivate at the same time.
Satellite Entryway HV Foam Sanitizer
Model # 976652
Overview
Key Features
- Applies a layer of rich, clinging foam to entryway floors to prevent cross-contamination
- Designed for 8'-16' wide/overhead doors
- Dilutes chemical concentrate "on-the-fly" from a container near the unit
- The unique HV Spreader™ nozzles lay a foam pattern 8'-16' across and up to 10' wide to ensure all foot traffic and cart wheels are fully exposed to the sanitizer
- Automatic activation and shutoff for use in moderate to high traffic areas
- Activated and operated by compressed air from the Satellite Controller - no electrical connection required at the entryway door.
- Adjustable foam consistency (wet/dry)
- Chemical resistant wetted components ensure durability and years of reliable service with minimal maintenance
- Choice of two Satellite Controllers:
- Timed Entryway Satellite Controller - An adjustable recycle timer applies foam at regular, timed intervals.
- PLC Jazz Entryway Satellite Controller - A pre-programmed PLC Controller allows variable settings for hours of operation and peak traffic demands.
- Available for smaller doors (#976650, 976651)
- See Catalog 6 for other entryway configurations
- Stainless steel mounting plate
- Water activation solenoid
- Machined polypropylene foamer body
- Color-coded precision metering tips to set dilution ratios
- Foam enhancer
- 10' discharge hose
- (2) HV Entryway Spreader™ nozzles (must use both)
Requirements
| Chemical Concentrate |
| Water | |
| Temperature | up to 160°F |
| Pressure | 35-125 PSI |
| Flow | 4 GPM @ 40 PSI |
| Supply Line | 3/4" Min |
| Compressed Air | up to 5 CFM |
| Hose/Pipe | 1" & 3/4" ID |
| Nozzle | HV Entryway Spreader (2 - use both) |
| Dilution Ratio Range | 914:1 to 6:1 @ 40 PSI |
Applications
- Agriculture/Horticulture
- Animal Health
- Food & Beverage
- Hatchery
- Pharm/Bio
- And Many Other Applications!