Magnetic EP-LM Asphalt Release Spray System
Model # 977895
Overview
The Magnetic EP-LM Asphalt Release Spray System is a magnetic sensor activated, time delayed, asphalt release applicator that mounts to a user-supplied drive-though arch for spraying asphalt truck beds. This system uses an electric pump to draw ready-to-use chemical from the included Level Master™ tank which maintains a constant supply of solution. When a truck comes into range of the magnetic sensor, a delay timer allows the driver to position the truck under the spray nozzle before spraying begins and a run timer applies release agent for a pre-set time or until the vehicle leaves the spraying area, whichever is first.
Key Features
  • Designed to spray asphalt release chemicals on to truck beds from a nozzle that attaches to an existing drive-through spray bar
  • The electric pump draws pre-diluted chemical solution from any static container
  • The system delays for an adjustable length of time when a truck approaches the magnetic sensor, allowing the driver to position the truck, before activating for an adjustable, pre-set length of time
  • Magnetic sensor with adjustable sensitivity eliminates potential alignment issues associated with electric eyes (photocell sensors)
  • The driver remains in his cab and avoids the risk of slip-and-fall injury and chemical waste
  • Evenly coats the truck bed in just seconds, reducing run-off and chemical waste
  • Spraying will stop if the driver leaves the area early
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Available without a Level Master™ (#977894)
  • See other Lafferty asphalt release equipment and industrial chemical applicators in Catalog 8
Includes
  • Lockable, stainless steel pump enclosure
  • 110V Electric pump
  • Control box with delay/run timers and magnetic sensor
  • 7 Gallon Level Master™ system
  • 40' discharge hose with square spray nozzle

Options

Heater Assembly
Retro-Fit Heater Assembly# 720981
Drum & Tote Stick Lengths & Seal Materials
Drum Stick, 33" (Viton or EPDM)# 491643 / 491643-E
Drum Stick, 48" (Viton or EPDM)# 491648 / 491648-E
Drum Stick, 54" (Viton or EPDM)# 491645 / 491645-E
Tote Stick, 33" (Viton or EPDM)# 491653 / 491653-E
Tote Stick, 48" (Viton or EPDM)# 491654 / 491654-E
Tote Stick, 54" (Viton or EPDM)# 491656 / 491656-E
Level Masters Provide an Automatic Supply
of Ready-to-Use Chemical
Level Master (Various Tank Sizes)# 989304
Gemini Level Master (Various Tank Sizes)# 989316
Applications
  • Asphalt

Requirements

Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35 to 125 PSI
Supply Line 1/2"
Hose 3/4" ID x 40'
Nozzle #180193SS
Electric 120V
See Separate Instructions for:
Level Master™ 989304