DART™ EP-LM Spray System With 20 Gallon Level Master™
Model # 977886-20
Overview
The DART™ EP-LM Spray System is a push button activated, time delayed, asphalt release applicator that mounts to a user-supplied drive-though arch for spraying asphalt release agent onto truck beds. This system uses an electric pump to draw ready-to-use chemical solution from the included 20 Gallon Level Master™ tank, which maintains a constant supply of solution. When the system is activated, a delay timer allows the driver to position the truck under the spray nozzle before applying release agent. When run time expires, the system shuts down and resets.

Key Features

  • Designed to spray asphalt release chemicals on to truck beds from a nozzle that attaches to an existing drive-through spray bar
  • The electric pump draws ready-to-use chemical solution from the 20 Gallon Level Master™ which automatically maintains a constant supply of solution
  • The push button activated, adjustable, single-shot timer will delay for up to 60 seconds, allowing the driver to get in position, and then apply chemical for up to 60 seconds before shutting off
  • The driver remains in his cab and avoids the risk of slip-and-fall injury and chemical waste
  • Evenly coats the truck bed in just seconds, reducing run-off and chemical waste
  • The Level Master™ achieves a wide range of dilution ratios using city water pressure and precision metering tips
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • See other Lafferty asphalt release equipment and industrial chemical applicators in Catalog 8
Includes
  • Lockable, stainless steel pump enclosure
  • 110V stainless steel electric pump
  • Control box with delay/run timers & remote push button
  • 20 Gallon Level Master™ system
  • 40' discharge hose with custom fan spray nozzle

Options

Heater Assembly
Retro-Fit Heater Assembly# 720981
Drum & Tote Stick Lengths & Seal Materials
Drum Stick, 33" (Viton or EPDM)# 491643 / 491643-E
Drum Stick, 48" (Viton or EPDM)# 491648 / 491648-E
Drum Stick, 54" (Viton or EPDM)# 491645 / 491645-E
Tote Stick, 33" (Viton or EPDM)# 491653 / 491653-E
Tote Stick, 48" (Viton or EPDM)# 491654 / 491654-E
Tote Stick, 54" (Viton or EPDM)# 491656 / 491656-E

Requirements

Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35 to 125 PSI
Supply Line 1/2"
Hose 3/4" ID x 40'
Nozzle #180193SS
Electric 120V / 20A
See Separate Instructions for:
Level Master™ 989304