Pump Fed XV Foamer
Model # 919305
Overview
The Pump Fed XV Foamer is a high volume foam applicator for projecting ready-to-use foaming chemicals on to any surface up close or at distances up to 15 feet (25 feet with zero degree nozzle). This unit receives ready-to-use chemical solution from a central chemical feed system and creates rich, clinging foam by injecting compressed air into the solution to greatly increase volume and coverage ability. A high volume of foam is then projected through the discharge hose and foam nozzle.
Key Features
  • Receives ready-to-use chemical solution from a central chemical feed system
  • Designed for foam cleaning large surfaces and areas
  • Projects a high volume of rich, clinging foam which increases chemical contact time and effectiveness
  • Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
  • Fan pattern nozzle for quick coverage (up to 15' range)
  • Covers up to 500 sq ft (46.5 sq m) in 1 minute
  • Zero degree nozzle for up to 25' range
  • Adjustable foam consistency (wet/dry)
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Industrial-strength design holds up in tough environments
  • Available with a lower flow rate (#920105)
  • See other pump-fed applicators in Catalog 5
  • Design the optimal central chemical feed system with the Lafferty Pump-Fed Central System Calculator

Includes

  • Stainless steel mounting bracket
  • Stainless steel inlet and discharge ball valves
  • Machined polypropylene foamer body
  • 50' discharge hose
  • Polypropylene foam wand with fan and zero degree nozzles

Options

Stainless Steel Hose Racks
Large Stainless Steel Hose Rack# 224150
Foam Solution Check Valves & Strainer
Check Valve, PP, 1/2'' (EPDM)# 491409
Check Valve, PP, 1/2'' (Viton)# 491411
Check Valve, 316SS, 1/2", MF (Teflon)# 491348SS-T
Strainer, "Y", SS, 1/2" MF# 150350-1
Alternate Air Check Valve - EPDM Standard
Check Valve, Air, SS, 1/4" MM (Viton / Hast)# 491306
Stainless Steel Foam Wand, HV (Upgrade)
Convert PP Wand to SS (New Units)# 536605-X
Applications
  • Food & Beverage
  • Agriculture/Horticulture
  • Animal Health
  • Vehicle Wash
  • Dairy
  • Hatchery
  • Industrial
  • Military
  • Paper Mill
  • Pharm/Bio
  • And Many Other Applications!

Requirements

Ready-to-Use Chemical Solution
Temperature up to 160°F
Pressure 35 to 100 PSI
Flow 4 GPM @ 40 PSI
Supply Line 1/2"
Compressed Air up to 6 CFM
Hose 1" ID x 50'
Nozzle 00400 & 50400