High Pressure Rinse Station

Lafferty Equipment Manufacturing, LLC

Installation & Operation Instructions

Model # 919015 · High Pressure Rinse Station

Requirements

Water
Temperature up to 180°F
Pressure 400 to 1000 PSI
Flow 4.6 GPM @ 700 PSI
Supply Line 3/8"
Hose 3/8" ID x 50'
Nozzle 0511

Options

Stainless Steel Hose Racks
Large Stainless Steel Hose Rack# 224150
Optional Nozzles for lower and higher flow rates
Nozzle, SS, 1/4" - 0507# 180507
Nozzle, SS, 1/4" FE - 0520# 180520
919015
Lafferty Equipment Logowww.laffertyequipment.com
501-851-2820
Warning! Read All Instructions Before Using Equipment!

Overview

The High Pressure Rinse Station is designed for both pre-clean and post-clean rinsing of a variety of surfaces in and around food and beverage plants that are equipped with central high pressure water systems. Constructed with stainless steel components, this Rinse Station connects to 400 - 1000 PSI water and projects it through a hard hitting 5 degree stainless steel nozzle. 3 flow rates available.
Lafferty Equipment Manufacturing, LLC • 5614 Oak Grove Road • North Little Rock, Arkansas 72118

Unit Flow Rates

PSIGPM
4003.50
5003.91
6004.29
7004.63
8004.95
9005.25
10005.53
919015.jpg
PREVENTIVE MAINTENANCE: When the unit will be out of service for extended periods, place chemical tube(s) in water and flush the chemical out of the unit to help prevent chemical from drying out and causing build-up. Periodically check and clean chemical strainer and replace if missing.