Water Temperature | up to 180°F |
Pressure Washer | 2.2 - 5.5 GPM |
Supply Hose | 3/8" ID minimum |
Requirements
Water Temperature | up to 180°F |
Pressure Washer | 2.2 - 5.5 GPM |
Supply Hose | 3/8" ID minimum |
Overview
Safety & Operational Precautions
To Install (refer to diagram on next page)
.
SCAN QR CODE FOR
OVERVIEW & SETUP VIDEO
https://vimeo.com/515352837
.
Set the chemical dilution ratio by threading one of the color coded metering tips into each chemical check valve. See chemical labels for dilution ratio recommendation or consult your chemical supplier.
To Operate
NOTE: Foaming models (not sprayers) include two nozzles. The fan nozzle provides a wide pattern for faster coverage. The 0° nozzle provides increased foam throw distance. Install the preferred nozzle in the end of the foam wand.
Metering Tip Selection |
|||||||
---|---|---|---|---|---|---|---|
Metering Tip Color |
Dilution Ratio at GPM |
||||||
2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | |
Brown |
571:1 | 686:1 | 800:1 | 914:1 | 1029:1 | 1143:1 | 1257:1 |
Clear |
364:1 | 436:1 | 509:1 | 582:1 | 655:1 | 727:1 | 800:1 |
Bright Purple |
232:1 | 278:1 | 325:1 | 371:1 | 417:1 | 464:1 | 510:1 |
White |
149:1 | 179:1 | 208:1 | 238:1 | 268:1 | 298:1 | 327:1 |
Pink |
109:1 | 131:1 | 153:1 | 175:1 | 197:1 | 218:1 | 240:1 |
Corn Yellow |
83:1 | 100:1 | 117:1 | 133:1 | 150:1 | 167:1 | 183:1 |
Dark Green |
66:1 | 79:1 | 92:1 | 105:1 | 118:1 | 131:1 | 144:1 |
Orange |
55:1 | 67:1 | 78:1 | 89:1 | 100:1 | 111:1 | 122:1 |
Gray |
53:1 | 64:1 | 75:1 | 85:1 | 96:1 | 106:1 | 117:1 |
Light Green |
46:1 | 55:1 | 64:1 | 73:1 | 82:1 | 91:1 | 100:1 |
Med. Green |
40:1 | 48:1 | 56:1 | 64:1 | 71:1 | 79:1 | 87:1 |
Clear Pink |
34:1 | 41:1 | 48:1 | 54:1 | 61:1 | 68:1 | 75:1 |
Yellow Green |
28:1 | 33:1 | 39:1 | 45:1 | 50:1 | 56:1 | 61:1 |
Burgundy |
27:1 | 32:1 | 38:1 | 43:1 | 48:1 | 54:1 | 59:1 |
Pale Pink |
23:1 | 28:1 | 32:1 | 37:1 | 42:1 | 46:1 | 51:1 |
Light Blue |
21:1 | 25:1 | 30:1 | 34:1 | 38:1 | 42:1 | 46:1 |
Dark Purple |
18:1 | 21:1 | 25:1 | 29:1 | 32:1 | 36:1 | 39:1 |
Navy Blue |
13:1 | 15:1 | 18:1 | 20:1 | 23:1 | 25:1 | 28:1 |
Clear Aqua |
11:1 | 13:1 | 16:1 | 18:1 | 20:1 | 22:1 | 25:1 |
Black |
6:1 | 8:1 | 9:1 | 10:1 | 12:1 | 13:1 | 14:1 |
No Tip Ratio Up To: | 5:1 | 5:1 | 6:1 | 7:1 | 8:1 | 9:1 | 10:1 |
The dilution ratios above are approximate values. Due to chemical viscosity, actual dilution ratios may vary. |
Troubleshooting Guide |
---|
Problem | Possible Cause / Solution | |
---|---|---|
Startup | Maintenance | |
A) Unit will not draw chemical. B) Does not clean properly C) Using too much chemical | 1, 2, 3 1, 4 5 |
6, 7, 8, 9, 10 6, 7, 8, 10 |
Possible Cause / Solution | |
---|---|
Startup | Maintenance |
|
|
PREVENTIVE MAINTENANCE: When the unit will be out of service for extended periods, place chemical tube(s) in water and flush the chemical out of the unit to help prevent chemical from drying out and causing build-up. Periodically check and clean chemical strainer and replace if missing. |