---
title: In-Line Metering Tip Holders & Metering Plugs – Lafferty Learning Center
description: In-Line Metering Tip Holders & Metering Plugs Compact Sprayer with Metering Tip Holder Most Lafferty chemical dilution systems include a chemical check val
---

[Lafferty Learning Center ](https://www.laffertyequipment.com/learning)

# [In-Line Metering Tip Holders & Metering Plugs – Lafferty Learning Center](https://www.laffertyequipment.com/learning/in-line-metering)

 Written by [Admin](https://www.laffertyequipment.com/learning/author/admin) | May 6, 2026, 6:00:00 AM

# In-Line Metering Tip Holders & Metering Plugs

<https://www.laffertyequipment.com/hubfs/Imported_Blog_Media/Metering-Tip-Installation-low-1-1-1.gif> Compact Sprayer with Metering Tip Holder

Most Lafferty chemical dilution systems include a chemical check valve or metering tip holder that is threaded to accommodate a color-coded metering tip. Simply thread the metering tip into the bottom of the check valve hose barb, and slide the suction tube over it. Learn more with our [video guide](https://learning.laffertyequipment.com/proper-metering-tip-installation-and-removal-of-broken-tip-video/).

> An “In-line” metering tip holder or metering plug needs to be spliced into the chemical suction tube.

Some systems require a separate “in-line” metering tip holder or metering plug. Examples include High Concentrate “HC” models with 1/2″ suction tubing and systems with suction hose barbs that cannot directly accommodate a metering tip.

Refer to the instructions and parts diagram on the [Main Lafferty Website](https://laffertyequipment.com) to confirm the configuration and options for each model number.

#### **The video below shows how to splice a metering tip holder into the suction tube**.

The procedure is the same for “metering plugs”, which are sized to achieve a specific dilution ratio (2:1, 3:1, etc.) Note that some models are commonly used *without any *metering tip or plug installed to achieve the strongest possible dilution.

1. Cut suction tubing at desired location.
2. Thread metering tip into in-line metering tip holder. Do not overtighten.
3. Slide suction tubing over both ends of metering tip holder, with metering tip on *suction *side.
4. Secure with hose clamp (if provided).

[View full post](https://www.laffertyequipment.com/learning/in-line-metering)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Admin"
  },
  "dateModified" : "2026-06-16T07:22:45.615Z",
  "datePublished" : "2026-05-06T06:00:00Z",
  "headline" : "In-Line Metering Tip Holders & Metering Plugs",
  "image" : {
    "@type" : "ImageObject",
    "height" : 270,
    "url" : "https://www.cfstech.com/hubfs/Imported_Blog_Media/Metering-Tip-Installation-low-1-1-1.gif",
    "width" : 480
  },
  "mainEntityOfPage" : "https://www.laffertyequipment.com/learning/in-line-metering",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "Lafferty Learning Center"
  }
}
```