Conveyor Systems

Lafferty Conveyor Systems are designed specifically for Clean-In-Place chemical application onto conveyor belts and similar equipment. Additional CIP equipment, including foam and spray bars, can be found in our Drive Through Systems.

Showing 1 - 8 of 8 products

The Conveyor Mate is an adjustable foam applicator for Clean-In-Place foam application onto conveyor belts and other equipment. Featuring an all stainless steel cart assembly, this venturi injection system uses city or boosted water pressure (35 - 250 PSI) to draw and blend ... [Read More]
TransJector
Model: 910783
The TransJector is an "adjustable flow" chemical injector for feeding spray bars and arches with a nozzle flow rate from 3.3 to 7.3 GPM @ 40 PSI. This venturi injection unit uses city water pressure (40 - 125 PSI) to draw and blend chemical concentrate into the water stream.... [Read More]
TransJector Plus
Model: 910785
The TransJector Plus is an "adjustable flow" chemical injector for feeding spray bars and arches with chemical solution at up to 9.6 GPM @ 40 PSI. This venturi injection unit uses city water pressure (40 - 125 PSI) to draw and blend chemical concentrate into the water stream... [Read More]
TransJector Max
Model: 910789
The TransJector Max is an "adjustable flow" chemical injector for feeding spray bars and arches with chemical solution at up to 13.6 GPM @ 40 PSI. This venturi injection unit uses city water pressure (40 - 125 PSI) to draw and blend chemical concentrate into the water stream... [Read More]
TransFoamer
Model: 910800
The TransFoamer is an "adjustable flow" foam applicator for feeding 4 - 8 foot long foam bars with chemical solution at up to 5.3 GPM @ 40 PSI. This venturi injection unit uses city water pressure (40 - 125 PSI) to draw and blend chemical concentrate into the water stream an... [Read More]
TransFoamer Plus
Model: 910825
The TransFoamer Plus is an "adjustable flow" foam applicator for feeding 8 - 14 foot long foam bars with chemical solution at up to 7.8 GPM @ 40 PSI. This venturi injection unit uses city water pressure (40 - 125 PSI) to draw and blend chemical concentrate into the water str... [Read More]
Pump Fed TransFoamer
Model: 919290
The TransFoamer is an "adjustable flow" foam applicator for feeding 4 - 8 foot long foam bars with chemical solution at up to 7 GPM. This unit receives ready-to-use chemical solution from a central chemical feed system and creates rich, clinging foam by injecting compressed ... [Read More]
The TransFoamer is an "adjustable flow" foam applicator for feeding 8 - 14 foot long foam bars with chemical solution at up to 10 GPM. This unit receives ready-to-use chemical solution from a central chemical feed system and creates rich, clinging foam by injecting compresse... [Read More]
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com