3-Way Ball Valve Mixing Station

Model # 985300

The 3-Way Ball Valve Mixing Station is a chemical proportioner for accurately diluting 3 chemical concentrates to required ratios and filling any sized container with diluted, ready-to-use chemical solutions. This venturi injection system uses city water pressure (25 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Ball valve activation allows for hands-free dispensing. Available with separate flow rates for each ball valve to dispense into any sized container or equipment.

Key Features
  • Eliminates manual mixing and optimizes chemical utilization, employee safety and labor efficiency
  • Ball valve activation allows for hands-free dispensing
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Industrial-strength design holds up in tough environments
  • Water pressure gauge eliminates guessing, reduces set-up time and helps with troubleshooting
  • The dilution ratio for each valve is set independently
  • Draws chemical concentrate from any sized container
  • Choice of left or right side water inlet
  • Mixing stations can be plumbed in series
  • Choice of flow rates for filling small to large containers
    • Please specify the flow rate for each valve when ordering
    • Bottle Fill (BF), Low Flow (LF), High Flow (HF)
  • Available with push lever activation (#981300)
  • See other Lafferty chemical management systems in Catalog 9

Includes

  • Stainless steel mounting bracket
  • Activation ball valves
  • Polypropylene injector body
  • Integrated brass back-flow preventer
  • Easy-to-read water pressure gauge for accurate tip selection
  • 20 color-coded metering tips for setting dilution ratios
Chemical Concentrate
Water
Temperature up to 160°F
Pressure 25-125 PSI
Supply Line 1/2" Minimum
Flow
High Flow (Black Injector) 4.0 - 7.3 GPM
Low Flow (White Injector)  1.9 - 3.4 GPM
Bottle Fill (Blue Injector) 0.6 - 1.0 GPM
Dilution Ratio Range @ 40 PSI
High Flow 1,031:1 to 4.8:1
Low Flow 480:1 to 3.5:1
Bottle Fill 142:1 to 1.7:1
Stainless Steel Jug Racks
1 Gallon Round/Square# 224200
1 Gallon Round/Square Locking# 224200-L
2 ½ Gallon (8 ½" x 10 ½")# 224210
5 Gallon (12" x 12")# 224215
5 Gallon Round Locking# 224216
Safe Flow Lid™ for 1 Gallon Jugs
Lid, Suction Tube, and Strainer# 709101
Alternate Chemical Check Valve - EPDM Standard
Check Valve, Chemical, PP, 1/4" (Viton)# 491402
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com