Gemini™ Model 25 Mixing Station

Model # 982025

The Gemini™ Model 25 Mixing Station is a unique chemical proportioner that will simultaneously dilute and blend two chemical concentrates into one accurately diluted solution and dispense it into any sized container. The unique Gemini™ "double venturi" injection system incorporates two completely separated venturis in one injector body and uses city water pressure (25 - 125 PSI) to draw and blend 2 chemical concentrates into the water stream independently so that the chemicals never mix until they are diluted. Dilution ratios are controlled independently with precision metering tips. Ball valve activation allows for hands-free dispensing.

Key Features
  • Eliminates manual mixing and optimizes chemical utilization, employee safety and labor efficiency
  • Ball valve activation allows for hands-free dispensing
  • The unique Gemini™ proportioner draws 2 chemical concentrates and blends them downstream after dilution
  • Water pressure gauge eliminates guessing, reduces set-up time and helps with troubleshooting
  • Dilution ratios are controlled independently for each chemical using precision metering tips
  • Water flow rate of 2.2 GPM @ 40 PSI
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Industrial-strength design holds up in tough environments
  • Choice of left or right side water inlet
  • Available with push-lever activation (#982025PL)
  • Available with a higher flow rate (#982150)
  • See other chemical management systems in Catalog 9

Includes

  • Stainless steel mounting bracket
  • Activation ball valve
  • Machined polypropylene Gemini™ injector body
  • Integrated brass back-flow preventer
  • Easy-to-read water pressure gauge for accurate tip selection
  • 20 color-coded metering tips to set dilution ratios
  • Chemical suction & discharge tubes
Chemical Concentrate
Water
Temperature up to 160°F
Pressure 25 to 125 PSI
Flow 2.2 GPM @ 40 PSI
Supply Line 1/2"
Dilution Ratio Range @ 40 PSI
Left Pick-up 503:1 to 3.3:1
Right Pick-up 503:1 to 3.3:1
Stainless Steel Jug Racks
Jug Rack, SS, 1 Gallon, Round/Square# 224200
Jug Rack, SS, 2 1/2 Gallon# 224210
Jug Rack, SS, 5 Gallon, Round/Square# 224215
Safe Flow Lid™ for 1 Gallon Jugs
Lid, Suction Tube, and Strainer# 709101
Alternate Chemical Check Valve - EPDM Standard
Check Valve, Chemical, PP, 1/4" (Viton)# 491402
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com