Timed Entryway HV Foam Sanitizer - 24VAC

Model # 976560-24V

The Timed Entryway HV Foam Sanitizer (24V) is an automated foam applicator for projecting sanitizing chemicals on to floors of 8' - 16' wide overhead doors to prevent cross contamination. When activated, this venturi injection system uses city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. A high volume of rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and unique Spreader™ nozzles. The system timer is user-programmable to meet the needs of any facility. This unit requires 24VAC electrical input - a locally sourced standard step-down transformer is required.

Key Features
  • Applies a layer of rich, clinging foam to entryway floors to prevent cross-contamination
  • Designed for 8'-16' wide overhead doors
  • Dilutes chemical concentrate "on-the-fly" from a container near the unit
  • The unique Spreader™ nozzles lay a foam pattern 8'-16' across and up to 10' wide to ensure that all foot traffic and cart wheels are fully exposed to the sanitizer
  • Automatic activation and shutoff for use in moderate to high traffic areas
  • Adjustable timer controls the application of foam at regular intervals - up to 1 minute foaming and up to 1 hour off
  • Adjustable foam consistency (wet/dry)
  • Chemical resistant wetted components ensure durability and years of reliable service with minimal maintenance
  • Available for smaller doors (#976500-24V, 976530-24V)
  • Available for 120VAC electric (#976560)
  • See Catalog 6 for other entryway configurations
Includes
  • Stainless steel mounting plate
  • 24VAC, NEMA rated control box with run/delay timer
  • Water activation solenoid
  • Machined polypropylene foamer body
  • 20 color-coded precision metering tips to set dilution ratios
  • Foam enhancer
  • 10' discharge hose
  • (2) HV Entryway Spreader™ nozzles (must use both)
Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35-125 PSI
Flow 4 GPM @ 40 PSI
Supply Line 3/4" Min
Compressed Air up to 5 CFM
Hose/Pipe 1" & 3/4" ID
Nozzle HV Entryway Spreader
(2 - use both)
Electric 24V
Dilution Ratio Range 914:1 to 6:1 @ 40 PSI
Stainless Steel Jug Racks
2 ½ Gallon (8 ½" x 10 ½")# 224210
5 Gallon (12" x 12")# 224215
5 Gallon Round Locking# 224216
24V Control Box Upgrades (Specify at Time of Purchase)
Photocell Activation Upgrade# 976001EE-24V
Push Button Activation Upgrade# 976001PB-24V
Dual Pick-up Assembly
Entryway Dual Chemical Pick-up Assembly# 976012
Alternate Check Valve - Viton Standard
Check Valve, Chemical, PP, 1/4" (EPDM)# 491401
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com