WR-6 Sanitize/Rinse/Foam/Low Volume Foam Spray-All

Model # 975251

The WR-6 Sanitize/Rinse/Foam/Low Volume Foam Spray-All is a sanitizer and airless foam applicator with a dual-flow-rate rinse and foam modes. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The foaming solution(s) then flows through the discharge hose to a low or medium volume airless foam wand (0.4 GPM or 1.34 GPM @ 40 PSI) which draws in atmospheric air to create and project wet, clinging foam on to any surface. Quick-connect a low or high flow rinse wand to rinse at 1.0 GPM or 5.0 GPM @ 40 PSI. The high flow rinse wand doubles as a sanitizer wand to apply sanitizer in a fan pattern (2.3 GPM @ 40 PSI). Variable flow rates for foaming and rinsing makes this unit ideal for cleaning small or large areas.

Key Features
  • Designed for foam cleaning, rinsing, and sanitizing small to medium sized areas where compressed air is not available
  • Projects wet, clinging foam which increases chemical contact time and effectiveness
  • Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
  • Low volume foam nozzle can be adjusted to project a narrow stream or fan pattern to efficiently clean small areas
  • Medium volume foam wand provides quicker coverage
  • Two rinse wands allow for low or higher volume rinsing
  • The higher volume rinse wand is also used to apply sanitizer
  • Chemical resistant components ensure years of outstanding performance with minimal maintenance
  • Use it where 35-125 PSI water is available
  • Water pressure gauge eliminates guessing, reduces set-up time, and helps with troubleshooting
  • Available for low flow foaming and sanitizing (#975217)
  • See other Foam/Rinse/Spray systems in Catalog 1

Includes

  • Machined polypropylene manifold and injector body
  • Easy-to-read pressure gauge for incoming water
  • Ball valves to alternate foaming, low volume foaming, rinsing, and sanitizing
  • 20 color-coded precision metering tips to set dilution ratios
  • 50' hose with discharge ball valve and quick-connect socket
  • Quick-connect machined polypropylene airless foam wand (standard volume)
  • Quick-connect machined polypropylene airless foam nozzle (low volume)
  • Quick-connect machined polypropylene sanitize/rinse wand
  • Quick-connect machined polypropylene low volume rinse wand
Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35 - 125 PSI
Flow - Foam 1.34 GPM @ 40 PSI
Flow - Low Flow Foam 0.41 GPM @ 40 PSI
Flow - Sanitize 2.30 GPM @ 40 PSI
Supply Line 1/2"
Hose 1/2" x 50'
Nozzle
Sanitize 2550
Rinse 2510 or 2550
Foam A-25 Airless Foam Wand
Foam A-12 Airless Foam Wand
Dilution Ratio Range @ 40 PSI
Sanitize 526:1 to 7:1
Foam 306:1 to 6:1
Foam 94:1 to 8:1
Stainless Steel Hose Rack
Large# 224150
Stainless Steel Jug Racks
Jug Rack, SS, 1 Gallon, Round/Square# 224200
Jug Rack, SS, 2 1/2 Gallon# 224210
Jug Rack, SS, 5 Gallon# 224215
Safe Flow Lid™ for 1 Gallon Jugs
Lid, Suction Tube, and Strainer# 709101
Alternate Check Valve - EPDM Standard
Check Valve, Chemical, PP/Viton, 1/4"# 491315
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com