DBM Asphalt Release Airless Foamer

Model # 974700

The DBM Asphalt Release Airless Foamer is a drum-mounted, medium volume foam applicator for projecting asphalt release chemicals on to truck beds or tools to prevent asphalt from sticking, without compressed air. This compact venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate directly from the drum into the water stream to create an accurately diluted solution. The solution then flows through the discharge hose and wand to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam.

Key Features
  • No compressed air required
  • Screws into, and dispenses directly from, chemical concentrate drums for increased efficiency
  • Equipped with both fine and coarse threads
  • Dilutes and projects asphalt release chemicals on to truck beds and asphalt tools as wet, clinging foam which increases chemical contact time and effectiveness
  • Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Use it where 35-125 PSI water is available
  • Alternate configuration discourages unauthorized changes to the dilution ratio by restricting metering tip access
  • Available as a wall-mounted unit (#974114)
  • Available as a sprayer (#974600)
  • See other industrial chemical applicators in Catalog 8

Includes

  • Stainless steel inlet and discharge ball valves
  • Machined polypropylene injector body
  • 20 color-coded precision metering tips to set dilution ratios
  • 25' foam hose with stainless steel extension wand
  • Machined polypropylene airless foam wand
Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35 to 125 PSI
Flow 1.30 GPM @ 40 PSI
Supply Line 1/2"
Hose 1/2" ID x 25'
Nozzle A-25A Airless Foam Wand
Dilution Ratio Range 297:1 to 4:1 @ 40 PSI
Stainless Steel Hose Rack
Small# 224145
Stainless Steel Airless Foam Wand
Wand, SS, Airless Foam, A-25SS# 536625SS
Alternate Check Valve - Viton Standard
Check Valve, Chemical, PP(W), 1/4" (EPDM)# 491401
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com