Model 10 SS Combo Airless Foamer / Sprayer Kit

Model # 969710

Designed to work with a 2.2 - 3.5 GPM pressure washer. The Model 10 Stainless Steel Combo Airless Foamer/Sprayer Kit is an airless foam and spray applicator featuring a chemical injector quick connected to the pressure washer discharge. This unit draws and blends chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the hose and gun to the airless foam wand which injects atmospheric air to create and project wet, clinging foam on to surfaces up close or at distances up to 20 feet. Quick connect the fan pattern sprayer nozzle to apply a chemical spray.

Key Features
  • Designed for use with 2.2 - 3.5 GPM pressure washers
  • Draws chemical out of any sized container
  • Chemical injector at the pressure washer output eliminates the need to carry chemicals
  • Quick connect the airless foam wand to project wet, clinging foam and increase chemical contact time and effectiveness
  • Foam impacts at a lower pressure than spray, allowing a pressure washer to be used on more delicate surfaces
  • Use the fan pattern foam nozzle for wide coverage or the zero degree foam nozzle for increased range
  • Quick connect the fan pattern sprayer nozzle to apply a chemical spray
  • Your equipment is protected because no chemical passes through the pump
  • Industrial-strength, all stainless steel design ensures durability and reliable performance
  • Achieves chemical concentrations up to 7:1
  • Available as a "high concentrate" model to achieve a 5:1 concentration for tough jobs (#969710HC)
  • Available for 3 - 6 GPM pressure washers (#969720)
  • See other Lafferty high pressure applicators in Catalog 3
Includes
  • Quick connect machined stainless steel injector body
  • 6' chemical suction tube and strainer
  • 20 color-coded precision metering tips to set dilution ratios
  • Quick connect machined stainless steel airless foam wand with fan and zero degree nozzles
  • Quick connect fan pattern spray nozzle
Water Temperature up to 180°F
Pressure Washer 2.2 - 3.5 GPM
Discharge Hose 3/8" ID minimum x 50'
Stainless Steel Hose Racks
Large# 224150
Small# 224145
Stainless Steel Jug Racks
Jug Rack, SS, 1 Gallon, Round/Square# 224200
Jug Rack, SS, 2 1/2 Gallon# 224210
Jug Rack, SS, 5 Gallon# 224215
Pressure Washer Hose & Trigger Gun
HP 3/8" x 50' Hose & Trigger Gun Kit# 807069
Safe Flow Lid™ for 1 Gallon Jugs
Lid, Suction Tube, and Strainer# 709101
Lafferty Equipment Manufacturing, Inc.
5614 Oak Grove Road
North Little Rock, AR 72118
TFN: 1-800-999-2820

Comments and/or questions about this website should be addressed to webmaster@laffertyequipment.com