The TransFoamer is an "adjustable flow" foam applicator for feeding 8 - 14 foot long foam bars with chemical solution at up to 10 GPM. This unit receives ready-to-use chemical solution from a central chemical feed system and creates rich, clinging foam by injecting compressed air to greatly increase volume and coverage ability. The water, chemical and air flow can be adjusted "on-the-fly" via needle valves. This versatile unit can be used for both new installations and to retrofit existing properly sized foam bars.
Pump Fed TransFoamer Plus
Model # 919295
Overview
Key Features
- Receives ready-to-use chemical solution from a central chemical feed system (see options)
- Designed to feed existing foam bar installations or optional Lafferty foam bars 8' to 14' in length
- Creates rich, clinging foam which increases chemical contact time and effectiveness
- Adjustable foam consistency (wet/dry)
- Chemical solution and air flow can be adjusted during operation to fine tune settings based on results
- Foam bars can be positioned vertically, horizontally, at an angle or grouped in an arch for all around coverage
- Chemical resistant wetted components ensure durability and years of reliable performance
- Available for foam bars under 8' (#919290)
- Available to dilute chemical "on-the-fly" (#910825)
- See more foam/spray bar units in Catalog 10
Includes
- Stainless steel mounting plate
- Stainless steel solution inlet ball valve
- Machined polypropylene pump-fed foamer body
- Chemical solution and air flow needle valves
- 1.25" discharge hose barb
Applications
- Vehicle Wash
- Dust Suppression
- Conveyor Cleaning
- Agriculture/Horticulture
- Animal Health
- Industrial
- Military
- And Many Other Applications!
Requirements
| Ready-to-Use Chemical Solution (Minimum 35 PSI at the Unit) |
| Supply Line | 3/4'' I.D. |
| Temperature | up to 160°F |
| Pressure | 40-125 PSI |
| Flow | up to 10 GPM |
| Hose / Pipe | 1 1/2" Not included |
| Compressed Air | up to 8 CFM |
| Nozzles | Per Application |