RADAR™ EP-LM Spray System
Model # 977890
Overview
The RADAR™  EP-LM Spray System is an electric eye activated, asphalt release applicator that mounts to a user-supplied drive-though arch for spraying asphalt truck beds. This system uses an electric pump to draw ready-to-use chemical solution from the included 7 Gallon Level Master™ tank which maintains a constant supply of solution. When a truck breaks the electric eye's line-of-sight, a delay timer allows the driver to position the truck under the spray nozzle before spraying begins and a run timer applies release agent for a pre-set time or until the vehicle leaves the spraying area, whichever is first.

Key Features

  • Designed to spray asphalt release chemicals on to truck beds from a nozzle that attaches to an existing drive-through spray bar
  • The electric pump draws ready-to-use chemical solution from the 7 Gallon Level Master™ which automatically maintains a constant supply of solution
  • The system delays for an adjustable length of time when a truck breaks the beam of the electric eye, allowing the driver to position the truck, before activating for an adjustable, pre-set length of time
  • The driver remains in his cab and avoids the risk of slip-and-fall injury and chemical waste
  • Evenly coats the truck bed in just seconds, reducing run-off and chemical waste
  • Spraying will stop if the driver leaves the area early
  • The Level Master™ achieves a wide range of dilution ratios using city water pressure and precision metering tips
  • Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
  • Available with a magnetic sensor (#977895)
  • See other Lafferty asphalt release equipment and industrial chemical applicators in Catalog 8

Includes

  • Lockable, stainless steel pump enclosure
  • 110V stainless steel electric pump
  • Control box with delay/run timers and electric eye set
  • 7 Gallon Level Master™ system
  • 40' discharge hose with custom fan spray nozzle

Options

Heater Assembly
Retro-Fit Heater Assembly# 720981
Drum & Tote Stick Lengths & Seal Materials
Drum Stick, 33" (Viton or EPDM)# 491643 / 491643-E
Drum Stick, 48" (Viton or EPDM)# 491648 / 491648-E
Drum Stick, 54" (Viton or EPDM)# 491645 / 491645-E
Tote Stick, 33" (Viton or EPDM)# 491653 / 491653-E
Tote Stick, 48" (Viton or EPDM)# 491654 / 491654-E
Tote Stick, 54" (Viton or EPDM)# 491656 / 491656-E

Requirements

Chemical Concentrate
Water
Temperature up to 160°F
Pressure 35 to 125 PSI
Supply Line 1/2"
Hose 3/4" ID x 40'
Nozzle #180193SS
Electric 120V / 20A
See Separate Instructions for:
Level Master™ 989304