The Liberty LF Foamer is a "low volume" foam applicator for projecting ready-to-use foaming chemicals on to any surface up close or at distances up to 9 feet. This unit features a stainless steel enclosure and uses a cost-effective 1/4" Flojet air-operated, double-diaphragm pump to draw pre-diluted chemical from a static tank. It injects compressed air into the solution to greatly increase volume and coverage ability and projects rich, clinging foam through the hose, wand and fan nozzle.
Liberty LF Foamer
Model # 941106-LF
Overview
Key Features
- Draws pre-diluted chemical solution from a static tank
- Uses a cost-effective 1/4" Flojet AODD pump with Santoprene diaphragms
- The solution flow rate is regulated by the foamer body match the low-range of the air pump’s specified operating range which prevents the pump from running, at maximum capacity
- Projects a "low volume" of rich, clinging foam which increases chemical contact time and effectiveness
- Ideal for foaming small areas and near sensitive equipment
- Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
- Fan pattern nozzle with up to 9' foam throw
- Covers up to 500 sq ft (46.5 sq m) in 4.5 minutes
- Adjustable foam consistency (wet/dry)
- Chemical resistant wetted components ensure durability and years of reliable service
- Available as a portable unit (#941219-LF)
- Available with a higher flow rate (#941106)
- See other air-operated foamers and sprayers in Catalog 4
Includes
- Lockable, stainless steel enclosure
- Air inlet ball valve and regulator/filter
- Flojet 1/4" AODD pump
- Machined polypropylene pump-fed foamer body
- 50' discharge hose, stainless steel ball valve, polypropylene foam wand & fan nozzle
Requirements
| Ready-to-Use Chemical Solution |
|---|
| Compressed Air | up to 6 CFM |
| Hose | 3/4" ID x 50' |
| Nozzle | 40100 |
Applications
- Food & Beverage
- Agriculture/Horticulture
- Animal Health
- Hatchery
- Industrial
- Pharm/Bio
- And Many Other Applications!