The Uni-Body 2-Way A-25 Airless Foamer is a medium volume foam applicator for projecting two foaming chemicals on to any surface up close or at distances up to 6 feet without compressed air. Use the chemical ball valves to inject the two chemicals separately or simultaneously. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the discharge hose to the "airless" foam wand which draws in atmospheric air to create and project wet, clinging foam.
Uni-Body 2-Way A-25 Airless Foamer
Model # 975077
Overview
Key Features
- No compressed air required
- Designed to apply 2 separate chemicals or 2 different concentrations of the same chemical
- Chemicals can be applied separately or simultaneously by adjusting the ball valves
- The unique machined polypropylene uni-body design is both compact and cost-effective
- Designed for foam cleaning small to medium sized areas
- Projects a medium volume of wet, clinging foam which increases chemical contact time and effectiveness
- Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
- Projects foam up to 6' (depending on water pressure)
- Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
- Use it where 35-125 PSI water is available
- Available for just one chemical (#975075)
- See other configurations of Lafferty city water pressure foamers in Catalog 1
Includes
- Machined polypropylene injector body
- Inlet and discharge ball valves
- 20 color-coded precision metering tips to set dilution ratios
- 50' foam hose & machined polypropylene airless foam wand
Applications
- Agriculture/Horticulture
- Animal Health
- Dairy
- Food & Beverage
- Hatchery
- Industrial
- Janitorial/Sanitation
- Pharm/Bio
- Supermarkets
- And Many Other Applications!
Requirements
| Chemical Concentrate |
|---|
| Water | |
|---|---|
| Temperature | up to 160°F |
| Pressure | 35 to 125 PSI |
| Flow | 1.34 GPM @ 40 PSI |
| Supply Line | 1/2" |
| Hose | 1/2" ID x 50' |
| Nozzle | A-25 Airless Foam Wand |
| Dilution Ratio Range | 306:1 to 6:1 @ 40 PSI |