The Bullet™ Foamer is a low volume foam applicator that is ideal for applying foaming chemicals to close-up surfaces and hard to reach areas. A Flojet air-operated, double-diaphragm pump draws ready-to-use chemical from one static tank or blends water and chemical concentrate from two static tanks to create a wide range of dilution ratios. The solution is then projected through the discharge hose, extended wand and Bullet™ nozzle which draws in atmospheric air to create wet, clinging foam. This unique nozzle can be adjusted to project a wide or narrow foam pattern.
Bullet™ Foamer
Model # 935105
Overview
Key Features
- Lafferty's adjustable Bullet™ Airless Foam Nozzle
- Can draw ready-to-use chemical solution or blend water and chemical concentrate on the fly
- Projects a low volume of rich, clinging foam which increases chemical contact time and effectiveness
- Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
- Adjustable foam consistency (wet/dry)
- Has a low compressed air requirement and can be powered by a small 110V compressor
- Chemical resistant wetted components ensure durability and years of reliable service
- Available with a trigger gun and fan nozzle (#935115)
- See other air-operated foamers and sprayers in Catalog 4
Includes
- Polypropylene mounting plate
- FloJet 1/4" AODD pump with Santoprene diaphragm
- Two 6' chemical suction tubes and strainers
- 20 color-coded precision metering tips to set dilution ratios
- Air inlet ball valve and regulator/filter
- 50' discharge hose with stainless steel ball valve
- Polypropylene wand and Bullet™ airless foam nozzle
Applications
- Agriculture/Horticulture
- Vehicle Wash
- Dairy
- Hatchery
- Industrial
- Pharm/Bio
- And Many Other Applications!
Requirements
| Chemical Concentrate |
|---|
| Static Tank of Water |
| Compressed Air | up to 3 CFM @ 60 PSI |
| Hose | 3/8" ID x 50' |
| Nozzle | #10 Bullet Airless Foam |
| Dilution Ratio Range | 229:1 to 1:1 @ 40 PSI |