Ready-to-Use Chemical Solution | |
Temperature | up to 120°F |
Requirements
Ready-to-Use Chemical Solution | |
Temperature | up to 120°F |
Overview
Safety & Operational Precautions
To Install (refer to diagram on next page)
NOTE: Do not remove or tighten the lid using the handle. Rotational force on the handle can cause damage.
To Operate
Troubleshooting Guide |
---|
Problem | Possible Cause / Solution | |
---|---|---|
Startup | Maintenance | |
A) Sprayer sputtering B) No output / unit will not spray C) Tank will not pressurize and/or hold pressure | 1 1 |
2 2 2 |
Possible Cause / Solution | |
---|---|
Startup | Maintenance |
|
|
PREVENTIVE MAINTENANCE:
* Prior to storage, empty, clean and dry the foamer.
* Lubricate O-ring in pressure relief valve and the piston/cylinder with Dow Corning MOLYKOTE(R)111 Compound on a regular basis.
* Lubricate tank cap threads and both sides of the gasket with a small amount of Dow Corning MOLYKOTE(R)111 Compound to achieve a tight seal and to ease tightening and loosening. |